A closed grey electrical panel on a damp concrete basement wall with a water stain below it

Water Damage Repair Permits in Bellingham

Drying out a house and finish work like paint, carpet and cabinets don't need a City of Bellingham permit. Cutting into walls, replacing hidden pipe and changing wiring do. In an emergency, repairs can start right away, and the permit application goes to the Permit Center the next business day.

This guide covers City permits, the emergency rule, electrical inspections, asbestos and lead rules, and who issues permits outside city limits. Rules change, so confirm your job with the permit office before you rebuild.

Call now(360) 555-0123 Calls answered 24/7Nights, weekends, holidays
  • Connected fast
  • Bellingham and Whatcom County
  • Calls answered 24/7Nights, weekends and holidays
  • Connected fastStraight to a local restoration company
  • All of Whatcom CountyBellingham, Ferndale, Lynden, Blaine and more
  • Water, sewage and moldBurst pipes, floods and backups

Which water damage repairs need a permit in Bellingham?

Most cleanup and drying needs no permit. Repairs to the structure, pipes or wiring usually do. This table summarizes the City's "When Do I Need a Permit?" sheet (City of Bellingham, BSD #124, March 2021).

Work after water damage City permit?
Pumping out water, running fans and dehumidifiers No. Drying doesn't alter the building
Painting, papering, tiling, carpeting, cabinets, countertops No. Listed as exempt finish work
Stopping or repairing a leak in a pipe No
Clearing a clogged drain No
Replacing a concealed pipe that failed Yes. The City treats it as new work
Cutting away a wall or partition, or cutting a structural beam Yes. Not an "ordinary repair"
Changing electrical wiring Yes
Small alterations under $1,500 in six months No, unless electrical, plumbing or mechanical work is involved

Work exempt from a building permit can still need another City permit. The City lists extra rules for steep slopes, wetlands and the Lake Whatcom watershed. Check the full list in the City's When Do I Need a Permit? sheet.

The emergency rule: start now, apply the next business day

You don't have to wait for a permit to stop an emergency. The City says that when repairs must be done in an emergency, the permit application goes to the Permit Center on the next business day.

So a burst pipe on a Saturday night can be shut off, opened up and repaired. The permit application then goes in on Monday. Drying and cleanup can start at once, since they need no permit.

The Bellingham Permit Center is at 210 Lottie Street, phone 360-778-8300, email permits@cob.org.

Plumbing: fixing the leak vs replacing the pipe

Stopping or repairing a leak needs no permit in Bellingham. Replacing a hidden pipe does. The City says a concealed pipe that has to be removed and replaced counts as new work, and it needs a permit and an inspection.

An open sink cabinet on an exterior wall with the supply lines exposed
  • No permit: patching a leak, clearing a stoppage, or putting back a fixture without changing pipes or valves.
  • Permit: replacing a section of pipe inside a wall, floor or ceiling, or moving pipe.

Many frozen-pipe repairs fall in the second group. See burst and frozen pipe water damage for the cleanup side.

Electrical after water or flooding: inspection and replacement rules

An electrical inspection is required if any part of your electrical system was flooded, according to WA L&I. It's also required if you're replacing damaged wiring or equipment, or if the utility won't turn the power back on.

Washington rules say some parts can't be dried and reused. Under WAC 296-46B-110, submerged equipment must be handled this way:

  • Must be replaced: breakers, fuses, outlets (receptacles), light switches and dimmers, electric heaters and sealed devices.
  • Replaced or reconditioned by the manufacturer: wiring, breaker panels, HVAC equipment, motors, water heaters and appliances.

Swapping only outlets, snap switches and single breakers needs no electrical permit, according to L&I's disaster FAQ (November 2024). Any wiring change does. Inside Bellingham city limits, confirm the rule with the City Permit Center. You can do the work on your own home yourself, or hire a licensed electrical contractor. A hired electrician pulls the permit for their own work.

Don't turn power back on to anything that was underwater. L&I warns it may seem to work and still cause a shock or fire later.

City, County or L&I: who issues your permit?

Your permit office depends on where the home is, not on your mailing address. Some Bellingham addresses, including Sudden Valley, sit outside city limits.

  • Inside Bellingham city limits. The City issues building, plumbing and electrical permits. L&I lists Bellingham among the cities that run their own electrical permits and inspections.
  • Unincorporated Whatcom County. That includes Sudden Valley and other areas outside a city. Whatcom County Planning and Development Services issues building permits (360-778-5900). Electrical permits come from L&I, whose Bellingham office is at 1720 Ellis Street.
  • Other cities. Incorporated cities such as Ferndale issue their own building permits. Electrical permits there come from L&I. Ask your city hall.

Whatcom County waived its emergency repair permit fees for flood damage after the December 2025 floods. The waiver covers projects started from December 9, 2025, to December 31, 2026, under Executive Order 2025-05 (Whatcom County). Repairs already made without a permit can still be permitted without a fee before December 31, 2026. It applies to County permits only.

Not sure which side of the line you're on? Call the City Permit Center and give the address.

Sudden Valley and the Lake Whatcom watershed

Sudden Valley is unincorporated, so building permits come from Whatcom County and electrical permits from L&I. Inside the Lake Whatcom watershed, the County adds rules for projects that disturb soil.

Whatcom County issues permits all year. But dirt work that disturbs more than 500 square feet of land is barred from October 1 to May 31. Indoor repairs usually aren't affected. Outdoor fixes after a crawl space flood, like a new drain or regrading, may have to wait until June.

The Sudden Valley Community Association also has its own architectural approval, separate from County permits. See Sudden Valley for local water risks.

Asbestos: test before tearing out old materials

In Whatcom County, the Northwest Clean Air Agency (NWCAA) requires every remodel or demolition project to find out whether asbestos is present before work starts. Pulling out water-damaged drywall, ceiling texture or old flooring counts.

Drywall cut away above a basement floor to remove wet material

Asbestos turns up in older drywall joint compound, popcorn ceilings, vinyl flooring and pipe insulation. In Bellingham's 98225 ZIP code, 57% of homes were built before 1980 (US Census ACS 2020-2024).

  • Surveys are done by AHERA-certified asbestos inspectors.
  • Owner-occupied single-family homes: owners are exempt only from the worker certification rule. NWCAA says all other rules apply.
  • Rentals and apartments must use Washington-certified asbestos abatement contractors.
  • Material over 1% asbestos must be removed and disposed of properly, after written notice to NWCAA. Transfer stations won't take the waste without proof of that notice.

Testing can add days to a rebuild. Ask the restoration company whether it will test before removing materials in an older home.

Lead paint in pre-1978 homes

Anyone paid to renovate a home built before 1978 must follow lead-safe work rules. In Washington, the Department of Commerce certifies these firms under the Renovation, Repair and Painting (RRP) program. Washington runs the program in place of the EPA.

There's an emergency exception, but it's narrow. The EPA says the work that stops an emergency, like fixing a burst pipe, can skip some steps. These include warning signs, containment and training rules. Cleaning, cleaning verification and recordkeeping still apply.

Patching the hole in the wall afterward, or repainting water stains, is not emergency work. The full rule applies to those repairs. Homeowners working on their own owner-occupied home are not covered by the RRP rule. Landlords should read the rental water damage guide.

Who pulls the permit: you or the contractor?

Usually the contractor doing the work, but ask. For electrical work, L&I says a hired electrical contractor is responsible for permits for its own work. No one can work under another person's permit.

Ask the restoration company these questions before the rebuild starts:

  • Who applies for the building, plumbing and electrical permits?
  • Is the permit cost in the estimate?
  • Will you test for asbestos before removing drywall or flooring?
  • Are you an RRP-certified firm, if the house was built before 1978?

Dealing with water damage now? Call (360) 555-0123. Calls are answered 24/7 for Bellingham and all of Whatcom County. Your call is connected to a local restoration company, and this site may receive a referral fee. Check the company on L&I Verify before work starts.

Call (360) 555-0123

Common questions

Do I need a permit to repair flood or water damage in Bellingham?

Not for pumping, drying, cleanup or finish work. You do for cutting into walls or structure, replacing hidden pipe or changing wiring. In an emergency, apply the next business day. See Whatcom County flood recovery for the flood steps.

What if my water-damaged house has asbestos or lead?

Test before you tear anything out. NWCAA requires an asbestos check before demolition. Paid work on pre-1978 homes must follow lead-safe rules. Both can add time to the rebuild, so ask early.

Can I replace flooded outlets and breakers myself?

Yes, on your own home. Swapping only outlets, switches and single breakers needs no permit. Any wiring change needs a permit and an inspection.

Does insurance pay for permits?

It depends on your policy. Ask your adjuster whether permit fees and code-required upgrades are covered. See does insurance cover water damage in Washington.

Which permit office handles my area?

Inside Bellingham, the City. In Sudden Valley and other unincorporated areas, Whatcom County and L&I. See service areas for town-by-town pages.


Water in the house right now?

Shut off the main water valve, keep clear of wet outlets, and take photos before you move anything. Then call. Calls answered 24/7.

Call now